Posts

What’s the difference between launch x-prog3 programmer and the x-prog3 pc adapter?

Post by Launch X431

The major difference will be:1. X-prog3 PC version VW Audi Porsche ECU Cloning function is in the Data processing section2. The PC adapter connection is more convenient3. Data reading and writing speed is faster and more stable (3x times faster than Android tablet)4. Data processing and transfer on ...

How launch smartlink posts remote diagnostic requirements

Post by Launch X431

SmartLink Remote Diagnostics Since the launch of SmartLink remote diagnosis, thousands of remote diagnosis requirements have been released every day. At present, hundreds of thousands of remote diagnosis requirements release records have been accumulated on the platform. In order to allow us...

Launch smartlink remote diagnosis ordering steps have changed

Post by Launch X431

In order to better serve the majority of technical friends and improve the satisfaction of using remote diagnosis, Yuanzheng optimized the remote diagnosis program, and made relevant adjustments to the "Yuanzheng Super Remote Diagnosis Public Platform", please refer to the following for details.1. A...

Launch x431 app download

Post by Launch X431

Launch TeamViewer AddonLaunch TeamViewer QSX-431 TURBO (For North America only)X-431 TURBO Android DownloadMillenium Series (For North America only)Millenium Series PC DownloadX-431 PROS MINIX-431 PROS MINI  Android DownloadX-431 Diagun Series APK X-431  Diagun IV  ...

Launch x431 pad iii vs. x431 pad v vs. x431 pad vii

Post by Launch X431

Launch X431 Pad III, X431 PAD V and X431 PAD VII are professional and comprehensive diagnostic scan tools. They can do full system diagnosis, advanced programming, and a lot of special functions for wide car models. So what’s the difference? Which is better to choose? Here has listed the differences...

Smartlink c operations

Post by Launch X431

Operation steps: Turn off the vehicle ignition.Connect one end of the OBD 11 extension cable into the OBD-16 diagnostic connector of the Smartlink C dongle, and the other end into the vehicle’s DLC port.* For more information on DLC location. please refer to the Appendix.Plug one end of CAT-6 cro...

Smartlink c faq & appendix

Post by Launch X431

What’s the minimum requirement for network conditions?The remote SmartLink operation requires network broadband of 100 MB or above.What does the word “Delay” displayed on the Smartlink C screen mean?The Delay (network delay) indicates the quality of the current network. Different colors represent di...

Smartlink c working principle

Post by Launch X431

The Smartlink Remote Diagnostics System is a newly developed powerful service system dedicated to remote vehicle diagnosis and service. In this system, Smartlink C user, as a Smartlink Service Subscriber, can submit remote repair orders to vehicle repair companies (Smartlink B, the Smartlink Service...

How to use wechat scan code to bind a smartlink b and smartlink c device

Post by Launch X431

1.You can also download and install directly from the app store by searching for "WeChat" or Download WeChat mobile client from WeChat official website.WeChat official website:https://www.wechat.com/en/2. After the installation is complete, register a WeChat account.3. Use the WeChat scan ...

How to use launch pad v and xprog3 to change audi mqb gearbox?

Post by Launch X431

Audi MQB Gearbox Replacement GuideDescription:Here we take DQ200-MQB Gearbox as an example, replace its ECU and finish the settings. Tools Requirement:X-431 Pad V and X-431 G3 Software Requirement:Audi V28.70 and above, IMMO PROGRAM V10.02 and above. A Brief Introduction:There ar...