Launch X-431 IMMO Pad All-In-One Car Diagnostic Key Programming Tool
Please contact WhatsApp: +1 937 888 0032
Your shopping cart is empty!
Product Description
Launch X-431 IMMO Pad All-In-One Car Diagnostic Key Programming Tool
Launch X-431 IMMO PAD is based on the Android 7.1 platform and is equipped with an octa-core 2.0GHz processor, 4GB of memory and 64GB of storage. Its 10.1-inch full-fitting sunlight-readable Gorilla Glass screen boasts a vibrant 1920 x 1200 resolution. The tablet is IP65-rated water- and dust-resistant, with a dual-band Wi-Fi architecture providing a more reliable tool-to-VCI connection. The upgraded all-in-one Smartlink VCI supports CAN, CANFD, DoIP, J2534, D-PDU, RP1210 and Smartlink remote service, which enables the capability of ECU coding and programming that are required usually after immobilizer replacement.The upgraded Launch X-Prog 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine ISN code.
Launch X431 IMMO PAD Hights:
1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for fifth-generation Audi (0AW/0B5) gearboxs.
4. Supports reading, writing & cloning of the ECU for fourth-generation VW UDS engines.
5. Supports BMW E chassis 8HP gearbox ECU program wiping.
6. Support Mercedes(Engine, Gearbox, EIS) and BMW(Gearbox) ECU anti-theft data erase.
7. Supports 170+ Bosch, 10+ Siemens engine ECU and 18+ gearbox ECU BENCH mode clone.
- Bosch engine ECU: ME17,MED17,EDC17,MEVD17, etc.
- Siemens engine ECU: BMW(MSV90, MSD87, MSD85,MSD81, MSD80), Mercedes(SIM271DE2.0,SIM271KE2.0), VW/Audi(SIMOS8.6x,SIMOS8.5x,SIMOS8.4x), etc.
- Gearbox ECU: DQ200-MQB, DQ250XX, DL501 Gen1,VL381,VGS2- FCVT,VGS-FDCT,DQ400E,DL501 Gen2,DL382-7F,VGS2-FDCT,9G_Tronic,DQ380,DQ381, DQ500,AL551,AL450,AL552,AL951,8HPXX, etc.
Launch X431 IMMO PAD Functions:
Intelligent Diagnostic Function:
1. All systems OE-Level diagnostics for over 110 vehicle models.
2. Exceptional full functionality includes comprehensive OBD II diagnostics, bi-directional control, ECU coding & programming, etc.
3. Support CAN/CANFD/DoIP communication protocols and J2534/D-PDU/RP1210 communication standards.
4. Exclusive Smartlink remote diagnosis.
5. 25 advanced service functions.
6. Pre-scan and post-scan diagnostic report.
7. Expand diagnostic coverage via “Mall”.
8. Optional ADAS calibration function with the X-431 ADAS calibration tools.
9. Optional TPMS function with X-431 TSGUN.
Key Programming Function:
1. Supports key matching/copying, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Anti-theft modules replacement:Support anti-theft modules replacement of BMW, Mercedes-Benz, VW/Audi, Honda, Nissan, Hyundai, Kia, BYD, Changan, Wuling Baojun, GAC, SAIC Maxus, Great Wall Motor, Chery Car, Dongfeng Fengxing, JAC Passenger Car, etc
3. Anti-theft password reading:Supports the anti-theft password reading of Peugeot Citroen, GM, Nissan, Hyundai, Kia, Chery Cars, Dongfeng Fengxing, JAC Passenger Cars, etc.
4. Key Matching: Support key matching of Ford, GM, Mercedes-Benz, BMW, VW/Audi, Porsche, Peugeot Citroen, Land Rover Jaguar, Honda, Toyota, Nissan, Hyundai, Kia, BYD, Changan Automobile, Wuling Baojun, Great Wall Motors, Chery Cars, JAC Passenger Cars, etc
Launch X-431 IMMO PAD Tablet Specification:
Processor | 2.0GHz, Octa-Core |
Operation System | Android 7.1 |
Memory | 4GB |
Storage | 64GB |
Battery | 9360mAh |
Display | 10.1'', 1920*1200 |
Camera | Front 8MP, Rear 13MP |
Protection | IP65 |
WIFI | 2.4GHz/5GHz |
Interface | TYPE A *1 & TYPE C*1 |
Working Temperature | 0~50℃ |
Dimension | 320 x 211 x 46mm |
Smartlink C VCI Specification:
Display | 3.97“ single-touch screen, 320*480 |
Memory | 256MB |
Storage | 8GB |
Remote Communication | WIFI / Ethernet |
Working Voltage | DC 9V – 36V |
USB | Type B USB2.0 |
Power Consumption | <6W |
Work Temperature | 0~50℃ |
Dimension | 204 x 110 x 45mm |
Launch X-PROG 3 Specification:
Interface | DB26, DB15 |
Input Voltage | DC12V |
Input Current | 500mA |
Working Temperature | 0~50℃ |
Storage Temperature | -20~70℃ |
Vehicle Key Slot | To place car key for RF defection |
DB26 | Used to connect to each anti-theft cables |
Infrared slot for Benz key | Used to place the Mercedes-Benz infrared key to perform the key matching function |
Key IC hole | Used to place the key chip to perform the key matching function |
Status Indicator | Power supply indicator lamp |
DIY Slot | Used to connect the anti-theft ECU pin through the cable to read and write data |
Locker | To tighten loose EEPROM board |
DC 12V | Used to connect to the DC12 power supply |
DB15 | To connect with vehicle’s DLC |
EEPROM Slot | To insert EEPROM board |
Launch X431 IMMO Pad Package:
1. Launch X431 IMMO Pad Tablet
2. Smartlink C VCI
3. X-Prog 3
4. User Manual
5. Other Parts
When you order from launchx431.net, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.
The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.
Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.
Shipping from your local warehouse is significantly faster. Some charges may apply.
In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!